 |
Q-See QSD6204-250 4 Channel MPEG4 DVR with Remote Internet Monitoring and Pre-installed 250GB Hard Drive by Q-See
Digital Photo Product DetailsManufacturer: Q-See Format: CD Model: QSD6204-250 Product features: - MPEG4 Compression
- Record & Display at 30/120FPS
- Remote Viewing through IE Browser
- Pre-installed 250GB Hard Drive
- 3 Audio inputs and USB 2.0 Port for Backup on PC
Accessories:
Digital Cameras Photo Reviews of Q-See QSD6204-250 4 Channel MPEG4 DVR with Remote Internet Monitoring and Pre-installed 250GB Hard DriveCustomer Review: Hit the 'record' button Summary: 4 Stars
I purchased this item -- with 4 Swann Mega Flood Security Camera -- back in July 2008 and it is working fine so far. I gave it a 4 star for the following reasons:
Motion Sensor Recording - There are 4 levels (0-3) of sensitivity from which to select and you can set the area. I have tested this over and over and it works just fine with the cameras I am using with this unit.
- READ THIS: Once you are in the motion detector setup page, you need to use your remote to move it to the "AREA" section so you can set the area. Once you are in there, (this is where this unit loses 1 star) it's best to use both hands but you will get used to it ... the "STOP" button on the DVR will change the sensitivity level. Use the remote directional buttons to move the grid around. Once you are at a location you want to detect motion, hit the middle button (between the directional buttons) on the remote to select the location. From there you can use your remote button to add more detection grids. To DELETE a grid, you have to set the sensitivity to 0 and move it over the grid and hit 'select'.
Viewable on my laptop - every time my motion lights come on outside. I pop up the PC viewer to see if anything's up. This has saved me many trips.
Features - although the user interface (factored into the loss of 1 star in rating) is not very friendly, there are many features you can change .. including the 'reset to defaul' feature, which resets everything back to default. You can set the fps, the hours to record (either non-stop or by motion), video quality, etc,.
But remember to hit the RECORD button once you have set everything up or else ... it won't record. To get into the setup menu, you have to hit the STOP button to stop the recording. Again, user interface not so great but it has been working for me just fine.
Description of Q-See QSD6204-250 4 Channel MPEG4 DVR with Remote Internet Monitoring and Pre-installed 250GB Hard DriveThis Q-See Digital Video Recorder has a pre-installed 250 GB hard drive and RJ45 connection for Remote internet monitoring. Providing rock-solid, easy-to-use performance, this system is ideal for industrial, commercial and individual applications. With up to four cameras connected, you can monitor and record into the HDD for later play back. The RJ-45 connection allows you to monitor remotely from around the world through LAN or Internet. MPEG4 video gives you good quality video and good compression to save hard drive space.
Cameras
|
 |
|
|
|