Cisco-Linksys WVC54GCA Webcam 640x480 802.11G Wireless Internet Home Monitoring Camera
by CISCO SYSTEMS - ENTERPRISE
Our Price: $177.94
Availability: Usually ships in 1-2 business days
Buy Used: from $110.00 (click here)
Category: CE
See more product details
Customers in the UK,
Buy this product at amazon.co.uk
for British Pounds
Digital Photo Product Details
Manufacturer: CISCO SYSTEMS - ENTERPRISEAudio: English (Original Language)
Format: CD
Platform: Windows
Model: WVC54GCA
Product features:
- Product Type - Wireless Internet Camera
- Dimensions WxDxH - 3.54" x 1.46" x 4.02"
- Weight - 0.29 lb.
- Supports enhanced MPEG-4 and MPEG compression
- View video from your Wireless-G or wired ethernet network
- AmazonBasics High-Speed HDMI Cable (9.8 Feet/3.0 Meters) [Supports 3D + Audio Return Channel]
- AmazonBasics USB 2.0 A-Male to A-Female Extension Cable (9.8 Feet/3.0 Meters)
- TRENDnet SecurView Internet Surveillance Camera TV-IP110 (Silver)
- AmazonBasics Ultra-High-Speed HDMI Cable Braided (9.8 Feet/3.0 Meters)
Digital Cameras Photo Reviews of Cisco-Linksys WVC54GCA Webcam 640x480 802.11G Wireless Internet Home Monitoring Camera
Customer Review: Not bad on a Mac
Summary: 4 Stars
I got this camera this week, and so far, so good.
Installation using a Mac was a breeze. The key is not to use the installation CD from LinkSys, but to go straight to the web page. This is accomplished by first plugging the camera into a hard-wired ethernet port on a router, then finding out what IP address was given to the unit (most home users will be able to find this via their router's status web page or log file). Once you've got the IP address, plug that into your browser (I tried both Safari and Firefox, quite successfully, too) and go through the Setup page. After you've got it setup the way you want, power off, disconnect the ethernet, and power it back on to go into wireless mode. (NB: both interfaces, the ethernet port and the wifi port, use the same MAC address if you have MAC filtering enabled on your wireless access point.)
One point to note: I did try running the installation CD while running a VM (using Sun's VirtualBox and Windows XP) on my Mac, but due to the NAT'd address for the virtual machine (a class A 10.x.y.z address), my VM XP installation was not in the same subnet as the camera (a class C 192.168.1.x address), and the setup program could not find the camera. However, I was able to use the VM XP installation to load and run the ActiveX components for IE7 to view the MPEG4 ASX video stream as well as run the advanced Motion Detection ActiveX component for setting up "windows" that the camera detects activity within.
None of this is necessary for use with a Mac, however. The camera offers several ways of seeing its output that are compatible with Safari, QuickTime, or Firefox. For example, use http://my.camera/img/snapshot.cgi for stills, http://my.camera/img/video.mjpeg for motion JPEG video, or rtsp://my.camera/#### (where #### is your "Mobile Settings Access Code" from the Setup tab) for low data rate streaming video suitable for a PDA, cellphone, or Nokia Internet Tablet (I've an N800 that it works great with!) I was also able to get http://my.camera/img/video.asf to work in Safari with Flip4Mac installed, but performance was horrible, even on a 2.4GHz Core 2 Duo MacBook.
As I mentioned before, the camera can be setup with motion detection. The key to getting it to work decently is to make sure that you've got a proper motion window setup for the camera to watch for motion. The camera won't be fooled by gradual lighting changes (like dawn or dusk), so if you set the window to a static background (e.g., a covered concrete walkway, vs. a tree blowing in the breeze and subject to shadows from clouds), motion detection works quite well. You can also set the camera to not send motion alerts between certain times (like when you're asleep!) Of course, this must be tempered with my note below about setting the time
Wifi range seems to be good -- I've gone over 30' and through 2 interior walls from my D-Link DIR-655 802.11n router without any performance dropouts or other problems.
Overall, the camera works as it's advertised. I like the extra mounting hole on the back of the camera, the long power cord, and the standard video and still image formats available. I also like that you can specify the still image output format via the URL (just tack on ?size=#&quality=# to the snapshot.cgi), but wish the same could be done with the video stream. The video quality's not great, a bit grainy in low-light and colors are slightly washed out, but what do you expect for $[...]? I'm also not convinced the NTP client works at all on this device, which makes power outages or moving the device problematic for keeping the time set on it. (see update below!) Manual time setting must be done against the browser client you are running to view the Setup page.
That said, it's a strong 4 out of 5 stars in my book. I just might be buying another one of these to dedicate to the back yard...
--
Update, 22-May-2009
This camera's been running non-stop for the past 9 months, without any problems. The NTP client has proven to work just fine, in answer to my query above. I've never experienced any dropouts or disconnects that required me to reboot the camera. And, as I thought I might, I've bought another unit for my back yard!
The motion detection has proven to be a bit more problematic than I originally thought. The problem appears to be "blooming" in the image -- the automatic exposure control slowly climbs a little bit, and when the image gets to a certain point of over-exposure, the camera automatically steps the exposure back. This causes the entire frame to change -- and this causes the motion capture to trigger! I used the motion detection for a few weeks, and got several bum triggers. Watching the camera one day, I saw this happen, and was able to then confirm it happened in the same scenario later. I've since turned off the motion detection, and rely on an external IR motion detector to trigger my capture.
It's not the best webcam in the world, and it's not the cheapest (though darn close), but it is the best platform-independent, JPEG/MJPEG/MP4/RTSP, wifi webcam, for under a Benjamin. (Well, give or take, as the price does fluctuate.)
Things I wish they'd fix in a firmware update:
- Fix the motion detection bug described above.
- User specifiable NTP server.
- Non-Windows proprietary streaming video w/ audio.
- Automatic day/night exposure gain control.
- Ability to invert the image so the camera could be mounted from the "top".
Still, I'm happy with my purchase! And it still deserves a solid 4 stars.
More Cisco-Linksys WVC54GCA Webcam 640x480 802.11G Wireless Internet Home Monitoring Camera reviews:
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Description of Cisco-Linksys WVC54GCA Webcam 640x480 802.11G Wireless Internet Home Monitoring Camera
The Linksys Compact Wireless-G Internet Video Camera sends live video through the Internet to a web browser anywhere in the world This compact, self-contained unit lets you keep track of your home, your kids, your workplace. Unlike standard "web cams" that require an attached PC, the Internet Video Camera contains its own web server, so it can connect directly to a network, either over Wireless-G (802.11g) networking, or over 10/100 Ethernet cable. Choose either MPEG-4 or Motion JPEG video compression for a high-quality, high-framerate, up to 640x480 video stream.Digital Cameras & Photo Categories
Similar Digital Cameras & Photo Products
Cisco WVC210 Wireless-G PTZ Internet Security Video Camera with 2 Way AudioCisco; Windows; Digital Camera
Best price: $188.45
Price in other shops:
APC BE350G UPS SystemAPC; Windows; CE
Price in other shops:
NETGEAR FS105NA Switch 5Port MetalNetgear; Windows; CE
Best price: $20.00
Price in other shops:
Lenmar ACUSB4 AC Travel Adapter for up to 4 USB Powered Devices (Black)Lenmar Battery Solutions; CE
Price in other shops:
Cisco-Linksys Wireless-N Internet Home Monitoring CameraLinksys; Windows; Digital Camera
Price in other shops: